1. Sign into Percipio
2. From My Profile, select Instructor Schedule. The list of classes assigned to you displays.
3. From this list of classes, locate the specific class and select View Roster.

   

1. Sign into Percipio.
2. From Content, select Live Course (ILT). The list of live courses displays.
3. From this list of courses, locate the specific class and select the More Actions icon  in the Actions column, then select Manage Roster.

   

After opening the roster for a particular class, you see the class capacity, class status, and class start date across the top of the page. If you need additional details, click the View class details button.

The list of registered participants displays in the table under the Registered Learners tab. Click the Waitlist tab to see those learners who attempted to register after the registration window closed or class capacity was reached.

If you chose to activate the option to approve registration requests, you see a Pending approvals tab. Only site admins can approve pending requests. After learners make the request, site admins get an email notification.

To approve a single request, from the Pending approvals tab, locate the learner in the list, select the More Actions icon  in the Actions column, then select Approve Request. When you approve a request:

• If the class has reached maximum capacity, you have the option to either register the learner and exceed capacity, or add the learner to the waitlist.
• If you register the learner, the learner gets notified that their request was approved and their status changes to Registered.
• If you waitlist the learner, the learner gets notified that their request was approved and their status changes to Waitlisted.
• The learner has the option to Cancel their registration.

To deny a single request, from the Pending approvals tab, locate the learner in the list, select the More Actions icon  in the Actions column, then select Deny Request. When you deny a request:

• You must specify a reason for denying the request.
• The learner gets notified that their request was denied. The status of the course changes to available and they can request approval again for the same class.
• Percipio removes the learner's name from the Pending approval list. There is no record that you denied the request.

If you want to manage multiple learners at the same time:

1. Click Bulk Actions.
2. Select all or some of the learners using the check box on the left.
3. With learners selected, under Bulk Actions, select either Approve request or Deny request.

Whether or not you allowed learners to self-register, you can register learners for a class. When registering learners:

• A learner must have a Percipio user account before you can register them for a class.
• If multiple classes are available for one course, a learner can only be registered for one of its classes.
• You can register learners even if the class will be over capacity.
• You can register learners even if you did not add the live course to a channel they can access. In this case learners can only see the class listed on their Activity page.

To get started, click Register. There are three tabs available depending on what you need to do.

1. Type the learner name in the Learner name field. As you type Percipio finds matching user accounts.
2. Select the matching user account.
3. You can repeat until all learners you want to register display.
4. Click Save and add. All learners get added to the registration list and receive a registration email confirmation.

1. Click Download template.
2. Open the CSV file in your preferred editing application, such as Microsoft Excel or Google Sheets.
3. For each learner you want to register, add their Percipio user name with one user name per row.
4. Save the file in the native CSV format.
5. On the Register learners from CSV tab, click Select file.
6. Locate the file and click Open.
7. Click Register learners to this class. All learners get added to the registration list and receive a registration email confirmation.

You can only cancel a learner's registration prior to the class start date. If the class date passes, you can mark the learner incomplete and register them for another class.

From the Registered Learners tab, locate the learner in the list, select the More Actions icon  in the Actions column, then select Cancel registration.

When you cancel a learner's registration:

• Percipio sends a notification via email that the registration was canceled.
• The class shows as available in the live course list as long as the class is not full.
• The learner can re-register for that class or a different class of that same course.

Click the Registration Waitlist tab. For each learner listed you can either register them for a class or remove them from the waitlist.

If you are managing one learner at a time, locate the learner in the list, select the More Actions icon  in the Actions column, then select Register for this class, Register for a different class, or Remove from waitlist.

If you want to manage multiple learners at the same time:

1. Select Bulk Actions.
2. Select all or some of the learners using the check box on the left.
3. With learners selected, under Bulk Actions, select either Register for this class, Register for a different class, or Remove from waitlist.

   

When working with the waitlist:

• When you register a learner to this class, Percipio automatically removes them from the waitlist.
• You can register learners to a class even if the class will be over capacity.
• You can register a learner for a different class within the same live course. If that different class is also at capacity, you can add the learner to the waitlist of that other class or override its capacity.
• Canceling a waitlist request removes the learner from the list, but does not prevent the learner from joining it again.

Once a class date and time pass, you can mark it complete for each learner. Learners see the course as Started in their Activity until you mark it complete.

Click the Registered learners tab to begin.

To mark a single learner complete

1. Locate the learner in the list, then select the More Actions icon  in the Actions column, select Mark complete and score.

   

2. Specify the date that should appear for completion, today's date or the date of the class.
3. Enter a score for the learner.
4. Click Save. The learner sees the score and completion in their Activity.

Caution: Once you click save, you cannot change your action or score.

To mark multiple learners complete at the same time

1. Select Bulk Actions.
2. Select all or some of the learners using the check box on the left.
3. With learners selected, under Bulk Actions, select Mark complete and score. You are prompted to enter a date and score which will be applied to all learners selected.
4. Select Save. Learners see the score and completion in their Activity.

To mark learners complete with a CSV file

1. Select Bulk mark complete.

   

2. Select the date that should display for completion, today's date or the end date of the class.
3. Select Download CSV template.
4. Open the downloaded template. For each learner, add a new row. Specify each learner's email address or User ID in the labeled column. If you want to add a score, include the score in the Score column.
5. Save the CSV file.
6. Add the CSV and select Mark complete. All users in the CSV file are marked complete.

When you mark a course complete for a learner, the following occurs

• Once you confirm your selection for complete, you cannot make any changes to the completion status or score.
• If you perform a bulk action on a learner who already has a completion status and score, no changes are made to that learner.
• Learners see the completion status in their Activity from My Profile.
• When you select bulk action and enter a score, all learners selected receive that score.
• When completing a class, you must specify a completion date. This can be the date of the last class or the date you are entering the data (today's date).
• If a learner who attended is not on the registration list, you can add that learner at this time.

Once a class date and time pass, you can mark it incomplete for a learner who did not attend or meet participation requirements. Learners see the course as Started in their Activity after you mark it incomplete.

Click the Registered learners tab to begin.

To mark a single learner incomplete

1. Locate the learner in the list, then select the More Actions icon  in the Actions column, and select Mark incomplete.
2. You are prompted to confirm your selection.

Caution: Once you confirm the incompletion for a learner, you cannot change your action.

To mark multiple learners incomplete at the same time

1. Click Bulk Actions.
2. Select all or some of the learners using the check box on the left.
3. With learners selected, under Bulk Actions, select Mark incomplete.
4. Click Save. Learners see continue to see Started in their Activity.

When you mark a course incomplete for a learner, the following occurs

• Once you confirm your selection for incomplete, you cannot make any changes to the completion status.
• If you perform a bulk action on a learner who already has a completion status, no changes are made to that learner.
• Learners with an incomplete see the course as Started in their Activity from My Profile.

You may want to print the roster to use as a sign-in sheet or share with those who do not have online access.

Click Download. Choose either PDF or CSV format.

You can download the course roster as a CSV file. This file contains a list of learners who have interacted with at least one class associated with the course. The learners are grouped by class title, learner status (registered, waitlisted, approved, denied), and completion status. To download the course roster:

1. From the Content menu, select Live Course.
2. Locate the course in the list, then select the Actions menu  and Download course roster option.

You can download an audit history trail to see who made changes to learner registrations and when, including registrations, approvals, denials, and cancellations. To download the audit file:

1. From the Content menu, select Live Course.
2. Locate the class in the list, then select the Actions menu  and Download class audit option.

The CSV file provides specific class details at the top and then contains five sections:

• Learner registrations: Shows each learner who was registered to the class, who registered them, and on what date.
• Registration approvals: Shows each learner whose registration request was approved, by whom, and on what date.
• Registration denials: Shows each learner whose registration request was denied, by whom, and on what date.
• Canceled registrations: Shows each learner whose registration request was canceled, by whom, and on what date.
• Canceled waitlist requests: Shows each learner whose waitlist request was canceled, by whom, and on what date.